We are still actively working on the spam issue.

Ethernet

From InstallGentoo Wiki
Revision as of 00:56, 20 April 2019 by An0n (talk | contribs)
Jump to: navigation, search

Ethernet is a wired networking standard comprising of standardised ports, cables and network devices.

You know those blue cables you see coming out the back of computers? That's Ethernet. Ethernet's protocol has roots in the ALOHAnet, an early pre-internet network created by The University of Hawaii.

The Ethernet cable also has roots in Ma Bell's standard jack (RJ-11, RJ-14, and RJ-25) (NOTE: these refer to the ends of the cable). The Ethernet Cable is an RJ-45 interface which either uses one of two standards for wiring. These are the T568 standards. T568A is standard Ethernet, while T568B is for a specialty computer-to-computer (or Crossover) cable

Pinout Configurations

TIA/EIA-568 T568A termination
Pin Pair WireTemplate:Efn Color
1 3 tip Pair 3 Wire 1 white/green
2 3 ring Pair 3 Wire 2 green
3 2 tip Pair 2 Wire 1 white/orange
4 1 ring Pair 1 Wire 2 blue
5 1 tip Pair 1 Wire 1 white/blue
6 2 ring Pair 2 Wire 2 orange
7 4 tip Pair 4 Wire 1 white/brown
8 4 ring Pair 4 Wire 2 brown
TIA/EIA-568 T568B termination
Pin Pair WireTemplate:Efn Color
1 2 tip Pair 2 Wire 1 white/orange
2 2 ring Pair 2 Wire 2 orange
3 3 tip Pair 3 Wire 1 white/green
4 1 ring Pair 1 Wire 2 blue
5 1 tip Pair 1 Wire 1 white/blue
6 3 ring Pair 3 Wire 2 green
7 4 tip Pair 4 Wire 1 white/brown
8 4 ring Pair 4 Wire 2 brown

Wire qualities

For Ethernet, the quality of wire is rated from Category 3 to Category 8. However, you will mostly see Categories 5, 5A, and 6. Telephone wires are Category 1-2. These are also compared to another rating standard, the BASE-T standard.

A comparison of CAT types to quality and the BASE-T standard
Type Base (AT top support) Description
Cat 3 10BASE-T Hardly used anymore, was popular in early 90's networks
Cat 4 10BASE-T Used for telephone, supports signals up to 20MHz and voice transfer at 16 MB/s
Cat 5 1000BASE-T Current former standard. Supports 100Mhz signals, support for Gigabit data transfer
Cat 5e 1000BASE-T A variant on Cat 5, has modifications to prevent Cross-Talk
Cat 6 10GBASE-T Backwards compatible with Cat 5, 5e, and 3. Has shielding that prevents cross-talk. Thicker wires for larger quality. 250 MHz signals.
Cat 7 N/A A proposed standard for improvement on the previous Cat 6. While the standard has been finished, no such cable exists yet. Supports 40 GB/s transfer speeds and multiple mode configurations.
Cat 8 N/A A proposed standard for improvement on the previous Cat 7. 2000 MHz signal rates. The ISO was to ratify the standard in 2018, but have not yet done so.