Home server/Case guide

A short list of cases to stuff your drives in. If you have any good recommendations post them in the /hsg/ thread or create an account and add it to the list you lazy fuck. Rackmount cases are also welcome. If you own, or have owned one of these cases feel free to write a short review about what you like and dislike about the case. I will try to add as much detail to the pros and cons list as possible, especially anything that would help people avoid unfortunate surprises.

Consumer cases

6 or Less Drives⠀

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
placeholder	BitFenix Phenom Mini ITX	5+1 (use included adapter for 5.25 bay)	0	ITX	Compact Surprisingly large storage capacity for size Decent cable management for the size Supports large expansion cards/gpus and cpu coolers	Harder to find (might be discontinued?) Limited to ITX only Pricey (over 200USD on newegg at time of writing) Try to find used Limited expandability, only two expansion slots
placeholder	Cooler Master Elite 110	3	1	ITX	Compact Good airflow from the large intake fan Good price (50USD) Good build quality for the price	Limited storage Limited expandability, only two expansion slots Limited to ITX only Cramped, wiring might be a pain Limitations on expansion card length PSU sticks out the back, might be annoying for some
placeholder	Fractal Design Core 500	3	3	ITX, DTX	Good price (50USD) Shape allows for longer expansion cards than other SFF cases Mini ITX, Mini DTX motherboard compatibility	Limited storage Limited expandability, only two expansion slots Limited to small form factor motherboards Motherboards with SATA ports that are angled 90 degrees may conflict with installation As large as the node 304, but supports less 3.5in drives Wiring can be a bit difficult if you put an optical drive in the included 5.25in bay
placeholder	Fractal Design Node 304	6	0	ITX, Thin Mini ITX, DTX	Surprisingly large storage capacity for size Shape allows for longer expansion cards than other SFF cases Supports Three SFF form factors, ITX, thin ITX, DTX	Limited expandability, only two expansion slots Limited to small form factor motherboards Larger than most other ITX cases
placeholder	Cooler Master N200	3	4	mATX, ITX	Good price (40-50USD) Reasonable wiring options	Limited storage Very large compared to other options in this category

6-10 Drives⠀

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
placeholder	Fractal Design Node 804	8 (10 if bottom 2 mounting points are used)	2 (4 if bottom 2 mounting points are used)	mATX, ITX	Lots of storage options. 2 2.5in mounts (inside front panel), and 2 mounts for drives of either size (attached directly to bottom of case) Separated design allows for dedicated airflow over drives Reasonably expandable, 5 Full Height Expansion slots	No tie downs making wire management a bit difficult Drive caddies require an adapter for drives which lack the middle mount hole, you can get these from Fractal Design via their support portal, buy them when they are in stock, or you can 3D Print your own Cube shape might not work for some narrower spaces Cable clearance on the second cage is questionable Use angled sata cables if possible and be careful with SAS to sata cables if using SAS drives
placeholder	Lian Li Q26	10	1	ITX	Compact Lots of storage capacity for the size	Due to the form factor limitation, you will need an HBA Cramped, wiring will be a pain Heavy restrictions on expansion card and cpu cooler size Limited expandability, only 2 expansion slots Harder to find due to being discontinued Limited to ITX only
placeholder	Fractal Design Define R6	11 (if all tray slots are used)	2	ATX, mATX, ITX	Plenty of expansion options Good wire management options Highly customizable storage layout	You need to purchase extra trays because it only comes with 6 You might need an HBA to support >8 drives Pricy Large
placeholder	Antec P101 Silent	8	2	EATX, ATX, mATX, ITX	Plenty of airflow over the drives with three intake fans Relatively cheap, (~100USD) Supports a wide range of motherboards including E-ATX Good wire management options Plenty of expansion options	Trays do not support drives with non-standard mounting points (shucked drives and some NAS drives) Large
placeholder	Cooler Master N400	7+1 external	2	ATX, mATX, ITX	Cheap. Can be found for ~60USD or less used Plenty of expansion options	Recessed motherboard mounting position might have issues with motherboards that have 90° sata ports or USB headers PCI covers are break-off and can't be re-attached Iffy cable management

More Than 10 drives⠀

• A note on large storage arrays with 10+ drives. Most motherboards have less than 10 Sata ports. Once you start getting above 10 drives you will likely need to buy an HBA to support more drives than your motherboard is capable of handling. The recommended approach is to use a SAS HBA with SAS to Sata breakout cables. You can learn more about these on the Home server page.

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
placeholder	Fractal Design Define 7	14 (if all tray slots are used)	4	E-ATX(285 mm), ATX, mATX, ITX	Huge storage capacity Highly customizable storage layout Good wire management options Supports a wide range of motherboard form factors	Doesn’t come with all of the HDD mounting brackets so you have to buy more to get the full capacity. (Comes with 6x3.5 type B trays, packs of 2 are ~$15) Large Somewhat pricey. (sometimes goes on sale for < 100USD) Lots of drives use a lot of electricity
placeholder	Fractal Design Define 7 XL	18 (if all tray slots are used)	5	SSI CEB, SSI EEB, EE-ATX, E-ATX, ATX, mATX, ITX	Huge storage capacity Tons of Expandability options Highly customizable storage layout Good wire management options Supports a wide range of motherboard form factors	Doesn’t come with all of the HDD mounting brackets so you have to buy more to get the full capacity. (Comes with 6x3.5 type B trays, packs of 2 are ~$15) Large Pricy, especially when factoring in extra brackets Lots of drives use a lot of electricity
placeholder	Corsair 750D	6 (12 with extra drive cages, 24 modded )	4	XL ATX, E-ATX, ATX, mATX, ITX	Huge potential storage capacity Supports a wide range of motherboards Plenty of wire management options Tons of Expandability options. 9 Full-Height Expansion Slots Front three optical drive bays can be converted with an adapter for even more storage	You need to buy more cages to do so as it only comes with two You will probably run into heat issues if going the modded route More drive cages restricts motherboard and GPU size Large Lots of drives use a lot of electricity
placeholder	Cooler Master CM Stacker 810 (or any CM stacker case)	0 (up to 20 if modded, using 5.25 to 3.5 adapters)	0	XL ATX, E-ATX, ATX, mATX, ITX	Huge storage potential Old as fuck so likely to be cheap Crazy amount of 5.25 bays can be converted to 3.5in Hot Swap bays using adapters	Good adapters can be somewhat pricey Harder to find Lots of drives use a lot of electricity

Rack cases

While rack mount cases are designed to be used on a rack, some opt to use them without one. Consider Lack Rack for a cheap way to mount your server. Disk shelves are for hard drives only. Only use them if you already have a main server that has an external SAS HBA.

Make sure you check the depth of your rack before buying anything, some rack mount servers are incredibly long and might not fit a small 17” deep rack.

1U⠀

None at the moment

2U⠀

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
placeholder	Supermicro SuperChassis 826 (several SKUs)	12 (24 Disk Shelf)	2 (Some SKUs. Rear Hotswap bays)	ATX, E-ATX, EE-ATX (Depends on SKU)	Some SKUs support SAS and Sata drives Convenient Hotswap bays Two high quality redundant 1U power supplies Great build quality	Some SKUs only support proprietary motherboards. Check the website Restrictions on expansion card height. Expansion slots are all half height Restrictions on CPU cooler height Huge and heavy Lots of drives use a lot of electricity Expensive Small fans are loud, especially at heavy loads

3U⠀

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
placeholder	Norco-3216	16	2	EEB, CEB, ATX mATX, ITX	Huge capacity Support SAS and Sata Convenient Hotswap bays Supports a wide range of motherboards	Only supports one standard ATX PSU Huge and heavy Lots of drives use a lot of electricity

4U⠀

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
placeholder	Rosewill RSV-L4500	15	0	E-ATX ATX	Huge capacity Cheap Large 120mm intake fans means it will be quieter than most servers	No backplane or hotswapping Only supports one standard ATX PSU Huge and heavy Lots of drives use a lot of electricity Build quality may vary
placeholder	Netapp DS4246/DS4243	24	0	n/a	Huge capacity Support SAS and Sata Convenient Hotswap bays	DISK SHELF ONLY Huge and heavy Lots of drives use a lot of electricity
placeholder	Supermicro SuperChassis 846	24	2	EE-ATX, E-ATX, ATX (Depends on SKU)	Huge capacity Support SAS and Sata Convenient Hotswap bays Two high quality redundant 1U power supplies Some models support separate battery backup modules Great build quality 7-13 full height expansion slots (Depends on SKU) Can be modded for more quiet operation	Huge and heavy Lots of drives use a lot of electricity Expensive