We are still actively working on the spam issue.

DNSCrypt

From InstallGentoo Wiki
Revision as of 09:19, 29 November 2015 by Chocolate Chip (talk | contribs) (Chocolate Chip moved page DNSCrypt on wheels to DNSCrypt over redirect: You are a shithead)
Jump to: navigation, search

DNSCrypt acts as a local DNS resolver and uses elliptic-curve cryptography when passing messages to and from the DNS server. This is extremely useful for mitigating MITM attacks on DNS.

Only a few servers are known to currently support DNSCrypt, however, adoption is growing.

Installation

GNU/Linux

Requirements & dependencies

  `--  dev-libs/libsodium
  `--  net-libs/ldns
  `--  sys-apps/systemd (optional!)
  `--  virtual/pkgconfig

Building

  1. git clone git://github.com/jedisct1/dnscrypt-proxy.git
  2. cd dnscrypt-proxy
  3. ./autogen.sh
  4. ./configure --prefix=/usr
  5. make
  6. sudo make install
Remove systemd as a dependency

In version 1.6 systemd can be removed from the software by leaving its references out of the configure document before compiling. Relevant lines can be found around 3258 to 3288 of the configure document. End result should look something like this:

# MANUAL SYSTEMD PATCH. GO AWAY NSA.
have_systemd=no
HAVE_SYSTEMD_TRUE=
HAVE_SYSTEMD_FALSE='#'
 
# Check whether --with-systemd was given.
#if test "${with_systemd+set}" = set; then :
#  withval=$with_systemd;
#fi
#
#if test "x$with_systemd" = "xyes"; then :
#
#  PKG_CHECK_MODULES(SYSTEMD, libsystemd, have_systemd=yes,
#    PKG_CHECK_MODULES([SYSTEMD_DAEMON], [libsystemd-daemon], [have_systemd=yes], [have_systemd=no])
#  )
#  case $with_systemd:$have_systemd in #(
#  yes:no) :
#    as_fn_error $? "systemd expected but libsystemd not found" #"$LINENO" 5 ;; #(
#  *:yes) :
#
#$as_echo "#define HAVE_LIBSYSTEMD 1" >>confdefs.h
#
#   ;; #(
#  *) :
#     ;;
#esac
#
#fi
# if test "x$have_systemd" = "xyes"; then
#  HAVE_SYSTEMD_TRUE=
#  HAVE_SYSTEMD_FALSE='#'
#else
#  HAVE_SYSTEMD_TRUE='#'
#  HAVE_SYSTEMD_FALSE=
#fi

Now run echo /usr/local/lib > /etc/ld.so.conf.d/usr_local_lib.conf, sudo ldconfig and ./configure, then make and finally sudo make install.

Configuration

GNU/Linux

If you would rather run the commands yourself at boot time, edit your /etc/resolv.conf file to look like this: domain home nameserver <the DNSCrypt you picked for --local-address> options edns0 , lock it with sudo chattr +i /etc/resolv.conf, and then run the following script every time you boot up your PC:

sudo dnscrypt-proxy --local-address=<ip>[:port] --daemonize --resolver-address=<Server address> --provider-name=<Provider name> --provider-key=<Public key> --edns-payload-size=4096 --logfile=/var/log/dnscrypt-proxy.log.

Note: I recommend using 127.0.0.1 or 127.0.0.2, and port 40 instead of 53, should you ever want to use Unbound or Dnsmasq with it. I also recommend adding a second, or even a third nameserver (that you know works) to your resolv.conf file. Mine looks like this.

Systemd

WIP

OpenRC

sudo vim /etc/init.d/dnscrypt-proxy and then

#!/sbin/runscript
# $Id$

DNSCRYPT_LOGFILE=${DNSCRYPT_LOGFILE:-/var/log/dnscrypt-proxy.log}

rundir=${rundir:-/var/run/dnscrypt-proxy}
pidfile=${pidfile:-${rundir}/dnscrypt-proxy.pid}
rundir=${rundir:-/var/run/dnscrypt-proxy}
runas_user=${runas_user:-dnscrypt}
runas_group=${runas_user:-dnscrypt}

depend() {
	use net
	before dns
	after logger
}

start() {
	if [ ! -d "${rundir}" ]; then
		mkdir "${rundir}"
		if [ -n "${runas_user}" ]; then
			touch "${DNSCRYPT_LOGFILE}"
			chown ${runas_user}:${runas_group} "${DNSCRYPT_LOGFILE}"
			chown -R ${runas_user}:${runas_group} "${rundir}"
		fi
	fi

	ebegin "Starting dnscrypt-proxy"
	start-stop-daemon --start --quiet \
		--exec /usr/sbin/dnscrypt-proxy \
		-- \
		--pidfile="${pidfile}" \
		--logfile="${DNSCRYPT_LOGFILE}" \
		--daemonize --user=${runas_user} \
		--local-address=${DNSCRYPT_LOCALIP}:${DNSCRYPT_LOCALPORT} \
		--resolver-address=${DNSCRYPT_RESOLVERIP}:${DNSCRYPT_RESOLVERPORT} \
		--provider-name=${DNSCRYPT_PROVIDER_NAME} \
		--provider-key=${DNSCRYPT_PROVIDER_KEY}
		--edns-payload-size=4096
	eend $?
}

stop() {
	ebegin "Stopping dnscrypt-proxy"
	start-stop-daemon --stop --quiet --exec /usr/sbin/dnscrypt-proxy
	eend $?
}

You will need to make it executable, sudo chmod +x /etc/init.d/dnscrypt-proxy.

This init script will of course require a configuration file, located here /etc/conf.d/dnscrypt-proxy file. Pick two servers (one will work as the fallback server), whilst making sure they are compatible with the options you will want to use later on (DNSSEC with unbound, for instance), and add the following text:

DNSCRYPT_LOCALIP=127.0.0.1
DNSCRYPT_LOCALPORT=40
DNSCRYPT_USER=dnscrypt

DNSCRYPT_PROVIDER_NAME=
DNSCRYPT_PROVIDER_KEY=
DNSCRYPT_RESOLVERIP=

DNSCRYPT_PROVIDER_NAME=
DNSCRYPT_PROVIDER_KEY=
DNSCRYPT_RESOLVERIP=

DNSCRYPT_RESOLVERPORT=443

Make sure to substitute where appropriate. You will also need to add an account called dnscrypt, with no privileges, by running useradd -G dnscrypt dnscrypt. To activate the init script, issue sudo rc-update add dnscrypt-proxy

Lastly, edit your /etc/resolv.conf file with an editor of your choice, and add the following text:

domain home
nameserver 127.0.0.1
options edns0

Now you have to do is lock the file with sudo chattr +i /etc/resolv.conf.

Should anything fail, issue the same command with -i and temporarily change the nameserver to a DNS server of your choice until you fix the issue.

Windows

Use SimpleDNSCrypt, it just werks. If it doesn't, go talk to the developer.

Mac OSX

Android

iOS

Troubleshooting

Run hostip -r 127.0.0.1 example.com. If that outputs an IP, then dnscrypt is working and the problem lies with whatever DNS cache you're using (most likely Dnsmasq or Unbound).

If it doesn't look at /var/log/dnscrypt-proxy.log and figure it out yourself, or are you not a true /g/entooman?

External Links

DNSCrypt Homepage