We are still actively working on the spam issue.
User:LeOutlookingMan/Fidget Cube
Revision as of 19:22, 6 January 2017 by LeOutlookingMan (talk | contribs)
Draft for a proper page if there's enough interest
Fidget cubes are ...?
Features
All cubes have these common features that can be found on the sides of the device:
- Joystick
- Rocker switch
- 5 buttons, some are clicky and some silent
- Spinning disk
- 3 rollers/gears & rotating shiny ball
- Oval shaped indent (does nothing)
Exact implementations of these features can vary. For example, some cubes do have rubberized buttons while others don't, some cubes allow you to press/click the shiny ball and joystick, number of clicky buttons and so on.
The body of the cube measures approximately 3 cm on each side (not including sticking out parts).
Chinese Fidget Cubes
The following table shall give a short overview of some Chinese clones, their features and flaws.
| Vendor | Joystick | Rocker switch | 5 buttons | Spinning disk | 3 rollers | Shiny ball | Oval indent | Price | Packaging | Surface | Flaws | Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ebay (rightyoung, possibly others) | Rubberized, 3 clicky, 2 silent | No resistance | Clicky | ~$8 | Cardboard box that slides apart | Matte/smooth | Joystick[1] | Can be opened by lifting the rotating plate (with a knife or thin plastic tool) and undoing two small Philips screws underneath, comes apart without force. Rocker switch resistance is done with magnets. | ||||
| Gearbest | Plastic | $5 | Joystick, build quality, loud buttons[2] | |||||||||
| Fidgetbye | 2 clicky, 3 silent[3] | |||||||||||
| Antsylabs (Kickstarter original) | $25 | Pre-order only |
Common flaws
- The joystick is prone to get stuck pretty quickly. This may be due to wear and tear on the metal ball inside, which rubs against a another metal plate, causing a flat surface there on the ball. Applying some grease might or might not help.
- Build quality is hit-or-miss.
